An Innovative Multilayer PCB Manufacturer

Circuit Safety 101: Choosing the Right PCB Conformal Coating

Silicone Resin (SR) Conformal Coating

Electronic devices, like the gadgets we use every day, can face challenges from the environment. Things like moisture, extreme temperatures, and dust can harm these devices and make them not work as well. This is where conformal coating comes in – think of it as a kind of armor for technology.

Without conformal coating, electronic parts or PCB are left exposed and can be damaged by the environment. The conformal coating acts like a tough shield, protecting the delicate circuits from the bad effects of outside forces.

In this article, we’ll talk about conformal coating in an easy way, covering its types, uses, and how it’s applied. We want to show how important conformal coating is in making sure electronic devices can handle whatever the environment throws at them.

What is PCB Conformal Coating?

Waterproof Conformal Coating

PCB conformal Coating is the thin film of the protective layer applied to the Printed Circuit Board. The film is known as the polymer film. The film is used with a thickness of 25-250 micrometres. It creates a barrier between the board and the contaminations, thus protecting the PCB. Besides, it also acts like an insulation layer with good electrical and thermal properties.

Conformal Coating also helps increase the PCB’s dielectric, reliability, and operational integrity.

Is Conformal Coating Necessary for Your PCB?

The performance of PCB can deteriorate due to various factors, including the operating environment. Thus, to make your PCB perform well and make it long-lasting, you need to protect it. Conformal Coating acts like a protective layer that protects your circuit board from harsh environmental conditions in the long term. It can withstand environmental conditions like moisture, extreme temperatures, and chemical and salt sprays. These conditions could result in the electric failure of your board. Thus, the coatings ensure the reliability of printed circuit boards, reducing prematurely failed hardware costs. 

Furthermore, the Coating is used to:

  • Increase the dielectric between the conductors. 
  • Provide closer conductor spacing.
  • Protects board from corrosion and chemical attacks
  • Sometimes, it protects from mechanical stress, too

Types of Conformal Coating

There are various types of conformal Coating available on the market. Each one has its characteristics. Let’s look into some of the widely used conformal Coating in the PCB industry:

Acrylic Resin (AR) Coating

Acrylic Resin (AR) Conformal Coating

Acrylic conformal coatings are commonly used due to their excellent dielectric strength. They provide a fair level of protection against moisture and abrasion and are particularly noted for their ease of removal. This feature makes them ideal for applications requiring rework or repair.


  • High dielectric strength
  • easy to remove for rework or repair
  • Cost-effective
  • provides essential protection against a range of contaminants.


  • Not resistant to solvents
  • less durable compared to other types
  • not suitable for high-stress environments.

Silicone Resin (SR) Coatings

Silicone Resin (SR) Conformal Coating

Silicone coatings are known for their flexibility and excellent performance across a wide temperature range. They offer good resistance to chemicals, moisture, and salt spray, making them suitable for high-humidity environments.


  • Great for extreme temperatures
  • Flexible
  • good chemical and moisture resistance
  • ideal for high-humidity conditions.


  • Not abrasion-resistant
  • difficult to remove
  • can be challenging to apply evenly.

Urethane Resin (UR) Conformal Coating

Urethane Resin (UR) Conformal Coating

Urethane coatings are known for their moisture and chemical resistance. They are also abrasion-resistant. Thus, it makes them a robust choice for demanding applications.


  • Excellent moisture and chemical resistance
  • high abrasion resistance
  • suitable for harsh environments like aerospace applications.


  • Very difficult to remove
  • limited reworkability
  • can be sensitive to UV light

Epoxy Conformal Coatings

Epoxy Conformal Coating

Epoxy coatings are known for their hardness and excellent humidity resistance. These two-part compounds create a very durable and non-permeable layer.


  • Strong humidity resistance
  • high abrasion
  • chemical resistance
  • very durable once cured


  • Difficult to remove
  • not flexible
  • hard apply

Parylene Conformal Coating

Parylene Conformal Coating

Parylene coatings are unique in their application method (vapor phase deposition). It provides exceptional dielectric strength. They offer unparalleled resistance to moisture, solvents, and extreme temperatures.


  • superior moisture and solvent resistance
  • excellent dielectric strength
  • thin yet effective coverage


  • difficult to remove for rework
  • requires specialized equipment for application
  • expensive

Thin Film/Nano Coatings

Thin Film Conformal Coating

It is applied in a very thin layer. It provides a basic level of hydrophobicity. It protects against quick water exposure.


  • suitable for light moisture exposure
  • can be applied thinly and uniformly


  • Limited protection compared to other types
  • not suitable for harsh environments
  • provides minimal surface protection

How Do You Apply Conformal Coating?

Conformal Coating can be applied in the following ways:

  • Prepare the Surface

First, clean the electronic board to remove any dust or other particles. This ensures the Coating adheres well.

  • Apply the Coating

There are various methods to apply conformal Coating. It includes dipping, brushing, and spraying. Spraying is used for large batches, bruising for small areas, and dipping for equal and uniform coverage. 

  • Curing the Coating

After applying the Coating, it should be set. This can be done naturally or with heat or UV light, depending on the type of Coating used.

  • Inspection

Finally, inspect the board to ensure the Coating is applied uniformly. Ensure there are no missed spots or bubbles.

Application Process of Conformal Coating

Conformal Coating is a critical method for shielding circuit boards and electronic components from harsh weather conditions. Here is a brief guide to the many ways to apply conformal Coating.

Manual Spraying

This method involves using an aerosol can or handheld spray gun. It’s typically used for low-volume production when more sophisticated equipment isn’t available.


Good for small batches and specific areas.


It is time-consuming and requires manual masking of areas not to be coated. Quality may vary due to operator dependency.

Selective Coating

In this automated process, programmable robotic spray nozzles apply the Coating to precise areas on the circuit board. It is ideal for high-volume production and eliminates the need for masking. It requires advanced equipment and programming.


The PCB is immersed in the conformal coating material. The immersion and withdrawal speed, as well as the viscosity of the Coating, determine the film formation. It helps to apply the Coating uniformly. It is suitable for high-volume processing. At the same time, the process required extensive masking.


It is a simple technique where the brush is used to apply the coating in specific areas, mainly used in repair and rework applications. It is low-cost and straightforward for small areas or repairs. At the same time, it is labour-intensive and highly variable, not suitable for large-scale applications.


High-viscosity coatings may be diluted with solvents like acetone or toluene for more straightforward application. It allows for consistent coating thickness and ease of application. It requires careful handling and precise mixing to maintain coating properties.

Cure Methods

Silicone conformal coatings typically cure with exposure to moisture, reacting with ambient moisture to form the polymer coating. This can be accelerated with heat. The process is effective, with simultaneous drying and curing. It requires careful control of environmental conditions to prevent issues like blistering.

Conformal Coating PCB Standards

  • MIL-I-46058C:
    • This military standard has been around for a long time and is still widely referenced. It sets rigorous testing criteria for conformal coatings used in military applications. Although it’s been inactive for new designs since 1998, many in the industry still adhere to it.
  • IPC-CC-830B:
    • This specification is related to MIL-I-46058C but is continually updated. It’s an active specification widely used in the electronics industry.
  • UL94V0 and UL746E:
    • Underwriters Laboratories (UL) standards assess conformal coatings for flammability (UL94) and electrical safety (UL746E). They ensure that coatings used on electronics are safe and meet high safety standards.
  • IEC 61086:
    • This international standard is similar to MIL-I-46058C but is based on supplier self-certification. It provides a global standard for conformal coatings.


If you want to protect your PCB from tough conditions, like moisture and extreme temperatures, think about using Conformal Coating. It’s a layer that shields against contaminants, improves electrical properties, and enhances reliability. 

Our company, ElePCB, is an expert in applying coatings like Acrylic, Silicone, Urethane, Epoxy, Parylene, and Thin Film. We adhere to industry standards like MIL-I-46058C and IPC-CC-830B for top-quality work. 

We apply coatings using methods like spraying, dipping, and brushing, customized to your needs. Contact ElePCB to provide skilled Conformal Coating, ensuring your electronic components last longer and perform reliably.



What is PCB Conformal Coating Spray?

PCB Conformal Coating Spray is an aerosol-based protective chemical coating for printed circuit boards (PCBs). It protects electronic circuitry from extreme environmental conditions such as moisture, dust, and temperature variations. This spray forms a thin, protective layer that ‘conforms’ to the design of the PCB. Thus, it protects its electronic components and increases overall reliability.

How Do You Remove Conformal Coating?

The type of conformal Coating used determines how to remove it. Here are the general methods:

  • Solvent Removal: Many conformal coatings, mainly acrylics, can be removed using certain solvents. However, ensuring that the solvent does not damage the PCB components is critical.
  • Peeling: Certain coatings, such as silicones, can be peeled off.
  • Thermal or Burn-Through: Using a soldering iron to burn through the Coating for tiny rework.
  • Microblasting removes coatings that use abrasive and compressed air and is ideal for resistant coatings such as epoxy or parylene.
  • Grinding/scraping: Used to remove hard coatings and as the last option due to the risk of harming the PCB.


What Are The Most Common Conformal Coating Defects?

Common defects in conformal Coating include:

  • Bubbles or blisters: Caused by trapped or solvent air, which forms gaps in the Coating.
  • Cracking or breakdown occurs when the Coating does not adhere well to the PCB or due to thermal cycling.
  • Orange Peel: A rough surface that resembles an orange peel, mainly caused by incorrect spraying techniques or viscosity concerns.
  • Pinholes: Small holes in the Coating caused by air entrapment or surface impurities.
  • Uneven Coating: Differences in coating thickness are usually caused by faulty application procedures.

How Long Does It Take For Conformal Coating To Dry?

  • The drying for conformal Coating depends on the kind of Coating and environmental conditions:
  • Acrylics: Tack-free time varies from a few minutes to an hour, while complete curing might take 24 to 72 hours.
  • Silicones: Longer tack-free duration, maybe several hours; final curing might take anywhere from 12 hours to a few days.
  • Urethanes dry quickly, frequently within minutes, but final curing might take 24 to 48 hours.
  • Environmental elements such as temperature and humidity considerably impact these timeframes.



ELE PCB has got the IS09001:2015, IS013485:2016, ROHS and FCC certifications. We can offer all kinds of services, including PCB manufacturing and PCB assembly, sample orders and batch orders. For PCB assembly, utilizing 7 high-speed SMT PCBA lines from Yamaha and Sony, to meet our customers’ needs. Our extended services include PCB design &PCB Layout, hardware design engineering, firmware &software development, and personalization. ELE company is honored as an excellent supplier from any company all around the world. We deeply believe that our good service and experience will completely meet your needs. Integrality, value and innovation are the forces that drive our success.



We provide technical expertise form prototype through production increasing speed to market by 20%.

                   Contact us below to start discussing your project with our Technical Experts today.

                   Whether you already have Gerber Files, submit a Quick Quote for free estimate.

Is this article useful?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Still, need help? Contact Us:

Need a PCB or PCBA quote? Quote now

Get a Quote
About Michael

Michael is the general manager of ELEPCB, a leading PCB design and manufacturing company based in China. He has over 10 years of experience in the PCB industry, and has been involved in various projects.

Recent Posts